14.11.19

MuxLab showcases suitability for 4K videowall applications at InterBee 2019

muxlab 500763-TX_AR_Small

MuxLab, together with its distributor, Japan Material, is demonstrating the suitability of its products to deliver scalable videowalls with streaming content via H.264/H.265 protocol at InterBee 2019 which is being held in Tokyo, Japan.

Using MuxLab’s HDMI over IP H.264/H.265 PoE 4K30 transmitters (model 500763-TX) content can be delivered via HDMI up to 100m to a local Ethernet network, and output to four displays via MuxLab’s HDMI over IP H.264/H.265 PoE receivers (model 500762-RX).

This can create a 2 x 2 videowall that could be upscaled as needed by adding in equipment. The receiver delivers AV up to 4K60 to displays in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations.

Videowall and multi-view capabilities are supported by this combination of transmitter and receiver as a cost-effective solution. Exceptionally low bandwidth requirements allow for streaming AV over a local network, Wi-Fi and the Internet. The receiver accepts H.264/H.265 video streams up to 4K60. Video is upscaled from 1080p60 or 4K30 to 4K60.

Remote control of the video wall from any smart device is enabled with the MuxControl app, working with the MuxLab ProDigital Network Controller.

Also on display, is MuxLab’s eight-button IP PoE Control Panel (model 500816-IP), a wall or table-top mounted control panel for AV over IP equipment. Each button is programmable and allows integrators to streamline the installation environment while providing Ethernet, RS-232, IR and Relay ports. The control panel buttons can be configured and managed via web interface allowing individual programming and IR learning.